PREMIUM A GRADE NEW CYLINDER HEADS – TESTED AND INSPECTED HERE IN AUSTRALIA

OzWIDE Brand Cylinder Heads

Our complete assembled range of new cylinder heads meet or exceed our strict quality control.

Valve shim tappets on cylinder heads from factory are set to be within a range. An example of a manufacturer’s specifications can be from .010” to .015” on some cylinder heads which is a .005″ variation. Mass produced cylinder heads are usually within the manufacturers specifications but having the valve clearances set to the lowest side of the scale is not optimal.

At OzWIDE Engine Parts we ensure all tappets are set midway to the high end of the scale, doing this will ensure longevity on our cylinder heads. Having the correct valve tappet clearance ensures your valve will have the optimal time to cool which helps prevent your valves burning out premature. All the cylinder head faces are inspected, valve seats are vacuum tested to ensure perfect seal and any additional machining is carried out if required.

On average OzWIDE Engine Parts spends around 1.5 – 2 Hours of time to fine tune our cylinder heads before they meet our quality control.  Cylinder heads are imported as Australia does not manufacturer cylinder heads, We have aligned ourselves with manufacturers that we believe set our heads apart from most.

Our cylinder heads are not manufactured to be the cheapest on the market they are manufactured with quality in mind. OzWIDE Engine Parts has hundreds of brand new cylinder heads available for the petrol and diesel market.