Workshop Terms & Conditions

Workshop Terms & Conditions

These Workshop Terms & Conditions apply to vehicle servicing, mechanical repairs, diagnostics, engine repairs, cylinder head reconditioning, engine machining, engine reconditioning and other workshop services carried out by UMR Engines.

By authorising UMR Engines to inspect, diagnose, service, repair or carry out work on a vehicle, engine, cylinder head or other component, you acknowledge and agree to these terms.

These terms should be read together with our Privacy Policy and our Website Terms & Disclaimer.

1. Estimates & Quotations

Any estimate or quotation provided by UMR Engines is based on the information and condition reasonably known at the time it is prepared.

Vehicles, engines and components may contain faults, wear or damage that cannot be identified until dismantling, cleaning, inspection, testing or machining has commenced.

Where additional work or parts are found to be required, we will endeavour to contact you before carrying out work that materially exceeds the authorised scope or estimated cost.

Unless otherwise stated, quotations and estimates may be subject to changes in parts availability, supplier pricing and the actual condition of the vehicle, engine or components once inspected.

2. Authorisation of Work

Work will be carried out according to the repairs or services authorised by the customer.

Authorisation may be provided in person, by telephone, email, online booking request or another form of communication accepted by UMR Engines.

Where further faults or additional work are identified during the repair process, additional customer authorisation may be required before that work proceeds.

3. Diagnosis & Inspection

Vehicle and engine diagnosis may involve inspection, diagnostic scanning, mechanical testing, electrical testing, road testing, dismantling or other workshop procedures considered appropriate for the reported problem.

Diagnostic fault codes and test results are tools used as part of the diagnostic process and do not necessarily identify the final cause of a fault by themselves.

Diagnostic and inspection time may be chargeable even where the customer elects not to proceed with the recommended repair.

4. Additional & Unforeseen Work

Mechanical and engine repairs can reveal additional problems after dismantling or inspection.

Examples may include damaged fasteners, broken components, corrosion, previous repairs, damaged threads, worn internal components or other faults that were not reasonably identifiable before work commenced.

Where practical, UMR Engines will contact the customer to discuss significant additional work and associated costs before proceeding.

5. Engine Machining & Reconditioning

Engine machining and reconditioning requirements are determined by inspection and measurement of the components supplied.

The machining or replacement work required may not be known until components have been dismantled, cleaned, tested and accurately measured.

Components may be found to be cracked, excessively worn, previously machined, corroded or otherwise unsuitable for further service. Where this occurs, alternative repair or replacement options may need to be considered.

UMR Engines cannot guarantee that every engine, cylinder head or component presented for reconditioning will be suitable for repair.

6. Customer-Supplied Parts

Customers should discuss the use of customer-supplied parts with UMR Engines before work begins.

Where UMR Engines agrees to install customer-supplied parts, responsibility for the suitability, quality, specification and warranty of those parts remains subject to applicable Australian Consumer Law and the circumstances of the particular repair.

Additional labour or costs resulting from incorrect, unsuitable, incomplete or defective customer-supplied components may be chargeable.

7. Parts Availability

Parts availability can vary, particularly for older, uncommon, imported or discontinued vehicles and engines.

Where a required component is unavailable, additional time may be required to source an alternative, repair an existing component or determine another suitable repair method.

Any expected completion time may therefore change where parts availability or supplier delays are outside the reasonable control of UMR Engines.

8. Completion Times

Any estimated completion date or repair time is provided in good faith but is not guaranteed unless specifically agreed otherwise.

Completion may be affected by parts availability, additional faults discovered during repair, machining requirements, supplier delays or other circumstances outside our reasonable control.

We will endeavour to keep customers informed where a significant delay affects the expected completion of authorised work.

9. Road Testing & Workshop Testing

By authorising work, the customer authorises UMR Engines to operate, move and road test the vehicle where reasonably required for diagnosis, repair verification or workshop purposes.

Vehicles may also be operated on workshop diagnostic or road-test equipment where appropriate to the work being performed.

10. Pre-Existing Faults & Vehicle Condition

UMR Engines is not responsible for unrelated or pre-existing faults simply because they become apparent while the vehicle or component is at our workshop.

Older vehicles and components may have deterioration, previous repairs, modifications or wear that becomes apparent only during inspection, dismantling or testing.

Where practical, significant pre-existing problems identified during the work will be brought to the customer’s attention.

11. Modified & Older Vehicles

Modified, classic and older vehicles may contain non-standard components, previous repairs or modifications that differ from original manufacturer specifications.

These differences may affect diagnosis, parts identification, repair procedures, component availability and the time required to complete work.

Where vehicle or component specifications are uncertain, further identification, measurement or investigation may be required before suitable repairs or components can be determined.

12. Information Supplied by Customers

Customers should provide accurate information about the vehicle, engine, previous repairs, modifications, symptoms and any other matters relevant to the requested work.

Incorrect or incomplete information may affect diagnosis, parts identification, quotations, repair procedures and completion times.

13. Parts & Technical Information

Vehicle, engine and component information can vary according to model, production date, engine number, VIN, specification, previous modification and other factors.

Where identification is important, relevant vehicle and component information should be confirmed before parts are ordered or repair decisions are made.

Technical information, specifications and procedures should be checked against appropriate current manufacturer information, service data or other authoritative technical references where required.

14. Replaced Parts

Where practical and requested before the repair is completed, customers may ask to inspect replaced components.

Some replaced components may need to be returned to a supplier, manufacturer or reconditioner as exchange, warranty or core components and therefore may not be available for return to the customer.

15. Payment

Payment is generally required when the work is completed and before the vehicle, engine or components are collected, unless other arrangements have been agreed in advance.

Deposits or progress payments may be required for major repairs, engine reconditioning, special-order components or other substantial work.

16. Uncollected Vehicles & Components

Customers should arrange collection of completed vehicles, engines or components within a reasonable period after being advised that the work is complete.

Where completed work remains uncollected for an extended period, reasonable storage charges may apply after appropriate notice has been provided.

Any action involving long-term uncollected goods will be handled in accordance with applicable Queensland and Australian law.

17. Warranties & Australian Consumer Law

Our services and any goods supplied with those services come with guarantees that cannot be excluded under the Australian Consumer Law where that law applies.

Nothing in these terms is intended to exclude, restrict or modify any consumer guarantee, right or remedy that cannot lawfully be excluded, restricted or modified.

Any additional warranty applying to particular repairs, reconditioned components or replacement parts may be subject to the conditions provided with that work or product.

18. Warranty Claims & Further Problems

If you believe there is a problem with work carried out by UMR Engines, please contact us as soon as reasonably possible so the matter can be inspected and assessed.

Where appropriate, UMR Engines should be given a reasonable opportunity to inspect the vehicle, engine or component and determine the cause of the reported problem before further repair work is undertaken elsewhere.

Nothing in this section limits any rights or remedies available under applicable Australian Consumer Law.

19. Consequential Damage & Continuing to Drive

Customers should not continue operating a vehicle where warning lights, overheating, abnormal noises, loss of oil pressure, coolant loss or other symptoms indicate that continued operation may cause further damage or create a safety risk.

Damage resulting from continued operation after a serious fault becomes apparent may be separate from the original fault or repair.

If you are uncertain whether a vehicle should continue to be driven, contact the workshop before operating it further.

20. Personal Property

Customers should remove valuable or unnecessary personal property from vehicles before leaving them with the workshop.

UMR Engines will take reasonable care while a vehicle is in our possession but cannot accept responsibility for personal items unless responsibility arises under applicable law.

21. Privacy

Personal information provided in connection with bookings, quotations, repairs and other workshop services is handled in accordance with our Privacy Policy.

22. Changes to These Terms

UMR Engines may update these Workshop Terms & Conditions from time to time to reflect changes to workshop practices, services, technology or legal requirements.

The version published on this website at the relevant time will be the current version.

23. Contact UMR Engines

For questions about these terms or work being carried out by UMR Engines, contact:

UMR Engines
7 Moss Street
Slacks Creek QLD 4127
Phone: 07 3208 0017

Related Information

Privacy Policy  |  Website Terms & Disclaimer  |  Workshop Terms & Conditions

Last updated: 22 August 2026

Scroll to Top